
69
Example I: Position is read in priority order: RMC, GGA, RMA and
GLL.
Example II: BTW/DTW is priority first with: RMB, BWC and BWR.
The transmission ID (the first two letters after “$”) is ignored by the
Server. Present position is read, after that possible latitude and
longitude correction is added (C39 and C40) before the position is
sent over the Nexus Network to all instruments
12.8 Special NMEA sentences
The Server can read 2 special NMEA sentences which can be
send from a PC. One contains TBS (target boat speed), the other
CAD (customised angle data ) and CFD (customised fixpoint data
). These 3 data are retransmitted on the Nexus Network and can
be displayed as a sub-function on the Multi Control instrument.
To get the sub-function TBS, select main function SPEED and the
”empty” sub-function.Then press MODE and KEY together
followed by UP and DOWN thogether.
To get the sub-function CAD, select main function NAVIGATE and
the ”empty” sub-function.Then press MODE and KEY together
followed by UP and DOWN thogether.
To get the sub-function CFD, select main function WIND and the
”empty” sub-function.Then press MODE and KEY together
followed by UP and DOWN thogether.
Example of special NMEA-sentence:
$PSILTBS,X.X,N<CR><LF>
Knots
Target boat speed
$PSILCD1,X.X,X.X,<CR><LF>
CAD (000.0°-360.0°)
CFD (-327.67- +327.67 units)
This function is valid form Server version 2.4 and Multi Control
instrument version 2.3 or later.
CALIBRATION
Summary of Contents for Multi Control
Page 1: ...0 Instrument and Server Installation and Operation Manual...
Page 7: ...6 PART SPECIFICATION...
Page 83: ...82...