Nexus Multi Control, Installation And Operation Manual

Page: 33 / 83

32
You can either store the suggested values or set your own values.
The logic is that when you are at anchor, the alarm will warn you if
the boat is drifting towards deeper or shallower water. (See 7.4).
7.2.4 TEMPERATURE (TMP)
Water temperature. Units available in Celcius ( C ) or Fahrenheit (F).
(See 12.3, C23 and C24)
7.2.5 BATTERY (BAT)
Battery voltage at the Server.
7.2.6 BOAT SPEED (BSP/unit)
Boat speed through the water. Select the unit from knots (KT), km/h
(Kh) or miles/h (Mh). (See 12.1.2, C11). The text alternates between
(BSP) and the selected (unit).
7.2.7 HEADING (HDT/HDM)
Compass heading, heading true (HDT) or heading magnetic (HDM).
(See 12.3, C32 and C47).
7.2.8 UNIVERSAL TIME (UTC)
Time in hr/min/sec. This function will only be displayed if a GPS
receiver is connected to the system. The (UTC) is indicated by a
(U) after the time.
To set your local time (L) zone from (UTC), press KEY and the
first digit flashes.
If you want to add to (UTC), select underlining character ( _ ).
If you want to reduce from (UTC),
select minus sign ( - ) by pressing
UP .
To set the time zone value press MODE , DOWN and UP as
required.
To store the zone value press
KEY .
Example: In United Kingdom the local time zone setting should be
( _ 00h ZON) during winter time, and plus one hour ( _01h ZON)
in the summer time.
Note: Time zones of 0.5 hours can not be selected.
7.2.9 TIME TO GO (TTG): Time to go in hr/min
The function is based on actual speed towards next waypoint.
To display this function, you must navigate towards a waypoint.
(See 8.4 and 8.5).
DEPTH FUNCTIONS