59
12.3.3 C32 (00.0 VAR)
Magnetic variation. M/- 99.9°.
Easterly variation = underlining ( _ ) sign.
Westerly variation = minus ( - ) sign.
The local magnetic variation is usually printed in the sea chart.
12.3.4 C33 (Auto DEV)
Automatic compass deviation, (see 12.4.1).
12.3.5 C34 (Auto CHK)
Check of automatic compass deviation, (see 12.4.2).
12.3.6 12.3.6 C35 (Auto CLR)
Clear automatic compass deviation memory.
12.3.7 12.3.7 C36 (000°ADJ)
Compass transducer misalignment correction, (see 12.4.4).
12.3.8 C37 (OFF COG)
Select heading transducer to be displayed as main-function under
NAVIGATE.
(OFF) = Heading from compass transducer.
(ON) = Heading from navigator, course over ground (COG).
12.3.9 C38 (OFF SEC)
Format of position in latitude and longitude.
(OFF) = Position in degrees, minutes and 100:th of a minute.
Indicated by the sign (
.
) after the minute.
(ON) = Position in degrees, minutes and seconds.
No sign (
.
) after the minute.
12.3.10 12.3.10 C39 (0.00 LAT)
Compensation of latitude from WGS-84.
The value should be between - 9,99 and + 9.99 NM.
Use underlining sign ( _ ) for plus. Use minus sign ( - ) for minus.
12.3.11 12.3.11 C40 (0.00 LON)
Compensation of longitude from WGS-84.
The value should be between - 9,99 and + 9.99 NM.
Use underlining sign ( _ ) for plus. Use minus sign ( - ) for minus.
Note:
In code C39 and C40 the compensation must always be set
in 100:th of a minute, independently of the setting in code C38.
CALIBRATION
Summary of Contents for Multi Control
Page 1: ...0 Instrument and Server Installation and Operation Manual...
Page 7: ...6 PART SPECIFICATION...
Page 83: ...82...
