20
2.11.4 Compass transducer
Only the Nexus version can be used.
Compass transducer for S-5000, D50, S-520/S-525 and POWER
can be upgraded to Nexus standard. Contact your local Nexus
dealer for a quote.
2.11.5 GPS receiver
All Nexus GPS products can be connected directly to the Nexus
Network.
2.11.6 NMEA transducers
NMEA compass and NMEA wind transducer.
You must know which 2 cables from your other NMEA transducer
carry the NMEA out signal. If you have trouble call the dealer you
bought your NMEA instrument from. He should know the wiring
colour and will probably sell the ”plug set” which may be required.
We do not have this information.
Connect NMEA out signal from the NMEA transducer to Server pin
9 (IN). Connect NMEA return signal from the NMEA transducer to
Server pin 10 (RETURN).
Note a:
The Server allows only one NMEA transducer or
instrument connected to the input pins 9 and 10.
Note b:
Make sure the calibration codes (C76 and C77 in chapter
12.6 ) for NMEA transducers are correctly set.
INSTALLATION
Summary of Contents for Multi Control
Page 1: ...0 Instrument and Server Installation and Operation Manual...
Page 7: ...6 PART SPECIFICATION...
Page 83: ...82...
