4 - SETTING UP CONTROL UNIT
To make the control panel work correctly:
- Make the connections as shown in the diagram on the previous page, if there are sensors, check that the default
operation is correct or, alternatively, modify them, see paragraph 6.2, 6.3 and 6.4.
- If you want to control the system via radio control, associate the radio transmitter with the desired output (s), see
paragraph 5.
- If you want to control the system via wired commands, set the inputs as buttons, see paragraph
6.4
For a more precise control of the system it is advisable to also set the motor times, see paragraph 6.1
9
