STEP 1
Make a long press of button 3.
The led change color cyclically red and green.
Release the button corresponding to the sensor you want to set
LED colour
Output paired with TX
red
Wind sensor
green
Rain sensor
blu
Sun sensor
5
.2 CONFIGURATION OF THE FUNCTIONALITIES OF THE SENSORS
Default:
wind = opens when a wind speed exceeds 10km / h is detected
rain = closes when rain is detected
sun = closes when sun is detected
This procedure is used to set the actions of the motors upon intervention of the sensor alarms
ACTION:
long presso button 3
LED:
changes color cyclically
WIND
SENSOR
RAIN
SENSOR
SUN
SENSOR
STEP 2A
OPEN WHEN IT INTERVENES
= Press button 1, the LED starts
Flashing to set the wind speed
above which to intervene
CLOSE WHEN IT INTERVENES
= Press button 2, the LED starts
Flashing to set the wind speed
above which to intervene
DEACTIVATE = Press button 3
N° FLASH DESCRIPTION
1
Intervention 5km/h
2
Intervention 10km/h
3
Intervention 15km/h
4
Intervention 20km/h
5
Intervention 25km/h
6
Intervention 30km/h
7
Intervention 35km/h
8
Intervention 40km/h
9
Intervention 45km/h
STEP 3A
Make a short press during the
Flashing corresponding to the
desired intervention threshold.
STEP 2B
OPEN WHEN IT INTERVENES
= Press button 1, the LED starts
Flashing to set the wind speed
above which to intervene
CLOSE WHEN IT INTERVENES
= Press button 2, the LED starts
Flashing to set the wind speed
above which to intervene
DEACTIVATE = Press button 3
STEP 2C
OPEN WHEN IT INTERVENES
= Press button 1, the LED starts
Flashing to set the wind speed
above which to intervene
CLOSE WHEN IT INTERVENES
= Press button 2, the LED starts
Flashing to set the wind speed
above which to intervene
DEACTIVATE = Press button 3
ATTENTION
To perform a sensor operation test see paragraph 5.3
9
