5.4 SETTING THE DEVICES CONNECTED TO THE WIRED INPUTS
Default:
Input1= Wind sensor
Input2= Rain sensor
Input3= Sun sensor
This procedure changes the type of device connected to the wired inputs. The device can be a sensor or a button
dedicated to controlling the movement of the motors with different functions.
ATTENTION:
- by wire, the motors can be controlled in a synchronized way
- the wind sensor can only be set on input 1, the rain sensor on input 2 and the sun sensor on input 3.
STEP 1
Make a long press of keys 1 and 2.
The led lights up green.
INPUT 1
INPUT 1
INPUT 2
INPUT 2
INPUT 3
INPUT 3
ACTION:
long presso button 1 and 2
LED:
turn on green
STEP 3A
Make a short press of button 1, the
LED starts Flashing
STEP 4A
To end the count press the button
1 for a short time during the Flash
that corresponds to the function
desired
FLASH
FUNCTION
1
Wind sensor
2
Step by step button
3
Open button
4
Stop button
5
Close button
6
Open (Dead man)
7
Close (Dead man)
8
Open/Close (Dead man)
STEP 3B
Make a short press of button 2, the
LED starts Flashing
STEP 4B
To end the count press the button
2 for a short time during the Flash
that corresponds to the function
desired
FLASH
FUNCTION
1
Rain sensor
2
Step by step button
3
Open button
4
Stop button
5
Close button
6
Open (Dead man)
7
Close (Dead man)
8
Open/Close (Dead man)
STEP 3C
Make a short press of button 3, the
LED starts Flashing
STEP 4C
To end the count press the button
3 for a short time during the Flash
that corresponds to the function
desired
FLASH
FUNCTION
1
Sun sensor
2
Step by step button
3
Open button
4
Stop button
5
Close button
6
Open (Dead man)
7
Close (Dead man)
8
Open/Close (Dead man)
11
