5 - ADVANCED PROGRAMS
5.1 - CONFIGURATION OF MANEUVER TIMES
Default: 60 seconds
This procedure is used to set the opening and closing manoeuvre time (maximum time that can be set 180 seconds).
NOTE:
Before carrying out this procedure check that the direction of operation is correct in relation to the transmitter
keys or wired command.
ACTION:
Short pressure button 2
LED:
Flash
ACTION:
Short pressure button 2
LED:
Turns off
ACTION:
long presso button 2
LED:
changes color cyclically
STEP 1
Make a long press of button 2.
The led change color cyclically red, green, blue and yellow.
Release the button corresponding to the motor output for which you want to set the
timing
LED colour
Output paired with TX
red
Motor 1
green
Motor 2
blu
Motor 3
yellow
Motor 4
STEP 3
To end the count press the button 2 for a short time during the Flash that
corresponds to the function desired
STEP 2
Press the button 2 on the receiver for a short time and count the number of Flashes
emitted by the LED (max 180 Flashes): each Flash represents a second of manoeuvre
time.
Attention: the control unit Flashes one time every 1 second, example: 120 seconds =
120 Flashes = 2 minutes of manoeuvre
8
