STEP1
Press key 1 as many times as the output number on which you want to program the transmitter
STEP2
Within 10 seconds make a transmission with the transmitter
to be saved.
See transmitter manual, the paragraph entitled “transmitter
programming” for specify information.
The led makes 3 Flashes and turns off.
4 - MANAGEMENT WITH REMOTE CONTROL
This procedure lets you programme/delete compatible multifunctional or generic (Wireless bus) transmitters.
Multifunctional transmitters:
With multifunctional transmitters the transmitter control modes depend on the model used.
Refer to the transmitter manual, to the paragraph entitled “commands sent by the transmitter”, bearing in mind that:
this is a dimmer device.
Generic (wireless bus) transmitters:
With generic transmitters, the functions associated with the key are those of motor step / step control.
The functions of the generic transmitters can be customized using the procedure in paragraph
8.1
.
4.1 - RADIO PROGRAMMING
This procedure lets you programme compatible multifunctional or generic transmitters.
ACTION:
Make a transmission with the transmitter
LED:
Flashes 3 times
no. of presses
LED colour
Output paired with TX
1
red
Motor 1
2
green
Motor 2
3
blu
Motor 3
4
yellow
Motor 4
5
off
/
6
