STEP 1
Short presses on key “A” let you choose the output to
programme the transmitter on, shown on display, see
following table:
DISPLAY
USCITA ABBINATA
L1
OUT1
L2
OUT2
L3
OUT3
L4
OUT4
STEP 2
Within 60 seconds make a transmission with the transmitter
to be saved.
See transmitter manual, the paragraph entitled “transmitter
programming” for specify information.
The led makes 3 Flashes and turns off.
4 - MANAGEMENT WITH REMOTE CONTROL
This procedure lets you programme/delete compatible multifunctional or generic (Wireless bus) transmitters
4.1 - RADIO PROGRAMMING
This procedure lets you programme compatible multifunctional or generic transmitters.
Multifunctional transmitters, codes:
HB80-1C, HB80-1DIM, HB80-2L, HB80-30D, HB80-30RGBW, HB80-4C, HB80-4DIM, HB80-4L,
HB90-6LT,
ROUND-1SP,
SENSA-M, SENSA-P, SENSA-R35M, SENSA-R35P, SENSA-R35T, SENSA-T,
TOUCH-1, TOUCH-1CCT, TOUCH-1DIM, TOUCH-1SP, TOUCH-1L , TOUCH-1RGBW, TOUCH-3C, TOUCH-
4DIM, TOUCH-CFU
With multifunctional transmitters the transmitter control modes depend on the model used.
Refer to the transmitter manual, to the paragraph entitled “commands sent by the transmitter”, bearing in mind that
this is a On/Off device.
Generic (wireless bus) transmitters, codes:
HB80-6G,
MCU-TX4,
TOUCH-1G, TOUCH-2G, TOUCH-4G, TOUCH-LOCK4, TOUCH-TX2,
ROUND-1G
With generic transmitters, the function of the button is On/Off
The functions of the generic transmitters can be customized using the procedure in paragraph 7.2.
ACTION:
Short press of button A
DISPLAY:
L1, L2, L3, L4, L1, L2...
ACTION:
Make a transmission with the transmitter
LED:
Flashes 3 times
8
