STEP 1
Short presses on the “SET” key let you scroll through the menu until “P2”
programming appears on the display.
STEP 2
A prolonged press on the “SET” key (approx. 3 seconds) takes you into
programming.
The LED on the receiver lights up
DELETION OF SINGLE
TRANSMITTER
DELETION OF ALL
TRANSMITTER SAVED
4.2 - DELETION OF REMOTE CONTROL
These procedures let you delete from the memory transmitters that have already been programmed.
STEP 2a
Give a long press on key “B” (approx. 3 seconds).
The LED on the receiver starts to Flash
STEP 2a
Within 5 seconds make a transmission with the remote
control that you want to delete.
The LED on the receiver will Flash rapidly and stay on
STEP 3b
Within 5 seconds quickly press key “B” to confirm the
deletion.
The LED on the receiver will Flash and stay on
ACTION:
Make a transmission with the transmitter
LED:
Flashing quickly and turns off
ACTION:
Short press of button “SET”
LED:
Flashing quickly and turns off
ACTION:
Short presses of button “SET”
DISPLAY:
“P6”
ACTION:
Prolonged press of button “SET”
DISPLAY:
“P2”
ACTION:
Prolonged press of button “B”
LED:
Flashes
STEP 4
The display show the main menu (P2, P%, P6, FS, P2...)
9
