7- ADVANCED PROGRAMS
7.1 SETTING TYPE OF INPUTS VIA WIRE
Default: button
This procedure lets you choose the type of wired devices to command loads.
The devices can be set as buttons or switches.
PROCEDURE
STEP 1
Short presses on the “SET” key let you scroll through the
menu until “P2” programming appears on the display.
STEP 2
A prolonged press on the “SET” key (approx. 3 seconds)
takes you into programming.
The LED on the receiver lights up
STEP 3
Short presses on key “A” let you choose the output on which to
set the type of load, see following table:
DISPLAY
FUNCTION
1
Out 1
2
Out 2
3
Out 3
4
Out 4
STEP 4
Short presses on key “B” let you choose the type of output that you want
to set, shown on display “b”, based on following table:
DISPLAY
TYPE OF WIRED INPUT
1
Button
2
Switch
ACTION:
Short presses of button SET
DISPLAY:
P2
ACTION:
Long press of button SET
ACTION:
Short presses of button A
DISPLAY:
1, 2, 3, 4, 1, 2...
ACTION:
Short presses of button A
DISPLAY:
1, 2, 1, 2...
STEP 5
To confirm, give a prolonged press on the “SET” key (approx. 3 seconds).
To cancel any change, press keys “A” and “B” together for approx. 3 seconds.
STEP 6
The display show the main menu (P2, P3, P6, FS, P2...)
ACTION:
Long press of button SET
16
