19
U
SING
Y
OUR
R
EMOTE
C
ONTROL
The remote control allows you to control TV viewing from anywhere in your home.
Your NSP (or yourself) can program it to operate your TV as well as your RG2C. The
remote control operates by sending either IR (infrared) or UHF (ultra-high frequency)
signals to the RG2C. Your Network Service Provider programs your remote to operate
in the most appropriate mode for your home.
If your remote control is programmed for IR mode, it requires a direct line-of-sight to
function. In other words, you need to point an IR remote directly to the television or the
RG2C. You can only use an IR remote to operate a TV that is located in the same
room as the RG2C. If your primary TV (TV1) located in a different room than the
RG2C, the remote must be programmed to use
UHF mode.
Remote controls that control secondary TVs (TV2, TV3), are also programmed to
operate in UHF mode.
