43
P
ROGRAMMING
THE
R
EMOTE
U
SING
C
ODE
S
EARCH
M
ETHOD
You can obtain TV codes by using the search method. To do this:
1.
Press the MUTE button and hold it down until the LED at the top of the remote
control flashes rapidly.
2.
Press the POWER button. The LED will light up and remain solidly lit.
3.
Press the up arrow to scan through all TV codes. When you reach the correct TV
code, the TV will automatically turn on, or off if it was previously on. Note that the
LED will flash rapidly once you have scanned through all the codes.
4.
Press the SELECT button to store the TV code. The LED flashes rapidly, then
stops, indicating that the TV code has been stored.
5.
Repeat procedure for each remote control.
6.
If you press the up arrow too rapidly, you may pass the TV code before the TV
turns on or off. If you are not sure you are storing the correct TV code, press the
down
arrow slowly to cycle back through codes that have been previously
scanned.
7.
When the TV turns off, or on if it was previously off, press SELECT at that point to
store the TV code.
V
ERIFYING
THE
TV C
ODES
1.
Press the MUTE button and hold it down until the LED at the top of the remote
control flashes rapidly.
