18
PARTS:
• • 2 x Seat Slider Ratchet Handles
24
A) Align the Rear Seat Slider assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
PARTS:
• • 2 x Seat Slider Ratchet Handles
23
A) Align the front seat slider assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
PARTS:
• • 6 x T-Nuts
• • 4 x M8 Countersunk Bolts
• • 4 x Sticky Felt Pads
(35mm x 40mm)
22
A) Install 2 x T-Nuts into the bottom channel of the front Seat Slider Member for the Butt-kicker Mount Pole. Install 2 x T-Nuts
into the top channel of both Seat Slider members and attach Felt Pads to the bottom of the Seat Slider Members.
B) Align the holes on the Seat Slider End Plates with the threaded holes on the Seat Members. Bolt through and secure with
4 x M8 Countersunk Bolts.
Repeat
on Other
Side
Repeat
on Other
Side
Video Instruction: bit.ly/nlrbuild
19
PARTS:
• • Seat Brackets
25
Align the Seat Brackets with T-nuts previously installed in STEP 22.
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
26a
Bolt through the seat brackets and secure using 4 x M8 Bolts and Washers.
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
Repeat
on Other
Side
26b
Slide the front Seat Slider member backwards and align the front slots on the Seat Brackets with the
T-Nuts previously installed in STEP 22.
A
)
B
)
A
)
B
)
A
)
B
)
(
Butt-Kicker T-Nut Locations
)
OVER-HANGING SEAT BRACKET
(
FOR TALLER USERS
)
