PARTS:
• • 2 x M8 20mm Low Profile Bolts
• • 2 x Steel Seat Spacers
PARTS:
• • 2 x M8 20mm Low Profile Bolts
• • 2 x Steel Seat Spacers
03
PARTS:
• • NIL
01
Slide the GTTrack Seat all the way back to access the front Bolts.
Align the rear mounting holes on the seat slider with the T-Nuts in the rear 4040 extrusion. Place Steel
Seat Spacer between the 4040 extrusion and the Seat Slider connected to the ERS1, bolt through the
Seat Slider and Steel Spacer into the T-Nuts.
PARTS:
• • NIL
02
Lift the Seat Slider Lever up and slide the seat all the way forward to access the rear mounting holes
on the Seat Sliders.
04
Slide the seat all the way back to access the front mounting holes. Align the front mounting holes on the seat
slider with the T-Nuts in the front 4040 extrusion. Place Steel Seat Spacer between the 4040 extrusion and the
Seat Slider connected to the ERS1, bolt through the Seat Slider and Steel Spacer into the T-Nuts.
Video Instruction: bit.ly/nlrbuild
GTTRACK COCKPIT
SEAT INSTALLATION
10
11
PARTS:
• • NIL
05
Lift both Seat Recliner Levers and adjust the Seat Back to the desired angle. Release the levers to lock
in place.
SEAT RECLINER ADJUSTMENT
