DioView 100
– User’s Guide
DioView 100
- User’s Guide
Page 18 of 22
Nexdio Co., Ltd.
♦
Conducting an Auto Slide Show
[OK]
[OK]
(1) Once the “AUTO SLIDE SHOW” is set to (ON), the presentation slides will advance
automatically with your set time between slide intervals.
(2) The default value of the slide interval is 10 seconds, and can be increased or decreased in
time intervals by pressing the [
▲
] or [
▼
] key between 00:00 to 59:59.
(3) Use the [
▲
] (
PREV
) or [
▼
] (
NEXT
) command key to manually advance or reverse the
currently view slide to another slide at the “AUTO Slide” mode. After the manual command, the
slide mode will return back immediately to the “AUTO Slide” mode set interval period.
♦
Setting a Slide Resolution
: This “
SLIDE RESOLUTION”
means the resolution of the VGA signal output format from the DioView
100 to the display device. (“AUTO” is set by default)
[OK]
[OK]
[OK]
{Slide: Auto Mode}
Select
SETUP
on the
menu screen and press
[OK]
Select
SLIDE SHOW SETUP
on the menu screen and press
[OK]
Select
SLIDE RESOLUTION
on the menu screen and press
[OK]
Select a resolution that your
display device supports and
press
[OK]
<Useful Hint
>
The
AUTO
mode will provide optimal resolution in most cases.
AUTO: Automatically detects the slide resolution and outputs the
most optimal VGA signal to the display device.
800 x 600: At this mode the slides will have a slight degradation in
quality, if the presentation file was originally converted to 1024 x 768.
Set this mode when the display device does not support “1024 x 768”
resolution, and the presentation file conversion is 800 x 600 only.
1024 x 768: Do not set this mode if the display device does not
support “1024 x 768” resolution.
Select
PRESENTATION
on the menu screen and
press
[OK]
Select a presentation file
to be presented on the list
and press
[OK]
PREV
: Previous Slide
STOP
: Stop Presentation
NEXT
: Next Slide
{Slide Interval, Second}
<Note>
Once the DioView 100 power is turned off and then turned on again, the “AUTO
SLIDE” mode will be off and return to the “Manual” mode, and the slide interval time will
return to its default 10 seconds interval as the default setup.
