Trial fit the vertical fin in position. Using
a 90 degree triangle, ensure that the
vertical stabilizer is perpendicular to the
horizontal stabilizer.
Using a pencil, trace around the vertical
stabilizer where it meets the fuselage.
Remove the vertical stabilizer from the
fuselage.
90 degree
triangle
Cut away only
the covering
both side
s.
Insert the vertical fin into the fuselage, precisely
align the vertical stabilizer as described
before.
Apply the thin CA glue on the vertical stabilizer
where it contacts the fuselage.
Securely glue together. If coming off during fly,
you lose control of your air plane.
Remove the vertical stabilizer from the
fuselage.
Using s sharp hobby knife,
carefully cut away the
covering
below the
lines
which were drawn in the
previous
steep.
Do not cut into the woods
as this
will affect the structural integrity of the
stabilizer
.
Apply thin CA
glue both side
CA
!
Vertical stabilizer
INSTRUCTION MANUAL / SPITFIRE
