! Securely glue together. If coming off during fly,
you lose control of your air plane.
Apply
thin
CA glue
both sides
CA
Apply thin CA glue into the slot where
the fuselage meet the horizontal stabilizer.
Install the horizontal stabilizer onto the fuselage and adjust the alignment
as described
before.
Note: it is important to ensure that the horizontal stabilizer is also level in
regards to the fuselage.
Apply the thin CA along the area where the covering was removed in the
previous step and to the fuselage where the horizontal stabilizer mounts .
Pull the rudder out of the vertical fin.
Carefully, push the vertical fin into the
slot on the fuselage as shown (12A).
B
B’
B=B’
CA
Horizontal and Vertical stabilizer
INSTRUCTION MANUAL / SPITFIRE
