Attach the gear door to the
wooden gear door mounts
.
S
ecure it in place using CA glue.
Do not glue the wooden gear
door mounts to the strut at this
time.
Slide the wooden gear door
mounts to the strut.
CA
Move the gear door (with gear door mounts) to up
or down, when satisfied, secure the wooden gear
door mount in place using CA glue.
Connect the electric retract with the radio to check
the position of the gear door when the electric retract
in retracted and expanded position.
ON
OFF
GEAR
SWITCH
CA
Sharpen this area to
ensure that the
gear door mount does
not touch the plastic
part of the E-retract.
Important:
When you “on” the retract switch,
if the retract gear does not retracted completely,
use your finger to push the retract gear to the
completely retrated position, then “off” the retract
switch, it will extend.
Use the hobby knife to remove the place
where the retract gear is entangled or sand the
area on the wooden gear door mount as show.
11
Wing: Gear door
INSTRUCTION MANUAL / SPITFIRE
