Position the engine to the engine mounts so the distance
from the prop hub to the fire-wall is
122
mm
.
Mark the engine mounting plate where the four holes are
to be drilled
.
Remove the engine and drill a 3mm holes through the beam
at each of the four marks made above (8C)
Reposition the engine on the engine mount
beams, aligning it with the holes. Secure the
engine to the engine mount using four
3x25mm screws
.
Note: Apply Silicon sealer to each of the
3x25mm screw and nut.
.......4
3x25mm screw
3mm Washer
.......4
C=
122
mm
Marking sure that you drill the hole perpendicular to the beam
of the engine mount.
3mm
c
.......4
3mm Nut
Engine installation
INSTRUCTION MANUAL / SPITFIRE
4
