3
2
Fixing the
oven
Connect to mains power supply ensuring the cable is not bent.
Lift oven into housing unit, do not lift the oven with the handle otherwise the glass
door might shatter.
Once the oven has been lifted into place in either of the housing units insert the
2
x plastic washers [06] into the holes located within the sides of the metal
casing of the oven and secure with
2
x screws [07].
Also ensure that you adjust the furniture doors adjacent to the sides of the oven
so there is a 4 - 6mm gap between them, otherwise heat displaced from the oven
might damage the furniture door.
The appliance is now ready to use.
03
04
[06]
x
2
[07]
x
2
Note:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
[06]
[07]
