NewTek NDI HX PTZ3, Operating Instructions Manual

Page: 8 / 66

Page | 8
2. Dial Switch Setting (on the bottom of camera). The PTZ3 default setting is 1-6 On, On, On, On, On, Off.
1.6
PRODUCT FEATURES
•
Adopts most advanced American ISP, 1/2.8 inch 2.4MP sensor, providing 1080P60 full HD video
resolution.
•
Big optical lens: 20x optical zoom, with 60-degree field of view.
•
1080P60 video over NDI|HX, support H.264 and H.265 encoding.
•
Supports Line in and Mini XLR audio input for excellent sound quality.
•
Supports NewTek NDI video transmission and control.
•
NDI|HX, HDMI, 3G-SDI outputs for different applications.
•
White Balance, Exposure, Focus, and Iris automatic or manual control.
•
Supports PoE (Power over Ethernet): a single connected CAT5/6 cable can provide the transfer of
video, control, and power needed by the camera.
•
Special Focusing Algorithm: fast and precise focusing performance when zooming or moving.
•
Smooth PTZ operation with accurate pan/tilt motor controls.
•
128 presets supported, e.g., Exposure and White Balance parameters can be saved in presets (in
manual mode).
•
Standard Sony VISCA, IP VISCA, PELCO-P, PELCO-D control protocols; IP VISCA over both TCP and
UDP.
•
Daisy chaining is supported with a max of 7 cameras connected in VISCA protocol.
•
Image flip function supports upside-down installation.
•
Supported field upgrade for ISP and ARM.
•
Support RS232/RS485 controls.
•
OSD menu in English and Chinese supported. IP address can be set in OSD menu.
Dial Switch (ARM)
SW-1 SW-2 Instruction
1 OFF OFF Updating mode
2 ON OFF Debugging mode
3 OFF ON Undefined
4 ON ON Working mode
Dial Switch
SW-3 SW-4 Instruction
1 OFF OFF reserve
2 ON OFF reserve
3 OFF ON reserve
4 ON ON reserve
Dial Switch (ISP)
SW-5 SW-6 Instruction
1 OFF OFF Working mode
2 ON OFF Working mode
3 OFF ON Updating mode
4 ON ON Updating mode