NewTek NDI HX PTZ3, Operating Instructions Manual

Page: 6 / 66

Page | 6
1.3
SAFETY GUIDES
1. Before operation, please fully read and follow all instruction in this manual. For your safety, always keep
this manual with the camera.
2. The camera power input range is 100~240V AC (50~60Hz), ensure the power supply input within this
range before powering on.
3. The camera power voltage is 12V DC, rated amperage is 2A. We suggest you use it with the original
power supply adapter supplied by the factory.
4. Please keep the power, video and control cable in a safe place. Protect all cables, especially their
connections.
5. Operational environment: -10 ℃ ~ 50℃, humidity less than 80%. To avoid any danger, do not put
anything inside the camera, and keep away from the corrosive liquids.
6. Avoid shock, vibration and moisture during transportation, storage and installation.
7. Do not disassemble the camera. For any service, please contact authorized technicians.
8. Video and control cables should be individually shielded, and should not be substituted with lesser
quality cables. Do not direct the camera lens towards strong light, such as the sun or other intense light
sources.
9. Use a dry soft cloth to clean the camera housing. Use only neutral non-abrasive cleaning agents.
To avoid damage to the camera lens, never use strong or abrasive cleaning agents on the camera lens. Do
not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera
head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS POWERED ON.
10. Place the camera with the base in only a horizontal or vertical orientation (such as on a desk, wall or
ceiling).
Note: The camera's video quality may be affected by the specific frequencies emitted by the electromagnetic
filed of other devices. Never grasp the head of the camera (as shown in the drawing below) and never move
the camera by hand when it is working, the mechanism maybe destroyed.