NewTek NDI HX PTZ3, Operating Instructions Manual

Page: 23 / 66

Page | 23
2.2
OSD MENU
1. Press the MENU key on the IR remote controller, to enter the OSD menu as below:
2. After entering the main menu, use the navigate UP/DOWN key to select the main menu. Once selected,
the main menu will change to blue background, and the right side will show all sub menu options.
3. Press the navigate RIGHT key to enter sub menu; use UP/DOWN key to select the sub menu options; use
LEFT/RIGHT key to change parameters.
4. Press the MENU key again to return to previous menu. Press the MENU key continuously to exit the OSD
menu.
5. OSD Menu Settings List.
SYSTEM
PROTOCOL Optional item VISC / PLC.P / PLC.D
Default: VISCA
ADDRESS VISCA: 1~7 PLC.P /PLC.D: 1~255
Default: 1
BAUDRATE Optional item: 2400 / 4800 / 9600 / 115200 Default: 9600
PROTOCOL LOCK Once set, above protocol setting will be locked Default: OFF
RS485 RS485 ON / OFF
Default: ON
VISCA PATH Optional Item: OVER ALL / OVER IP / OVER COM
Default: OVER ALL
语言
/LANGUAGE
Optional Item: Chinese / English Default: English