NewTek NDI HX-PTZ2, Operating Instructions Manual

Page: 11 / 46

Page | 7
Video Bandwidth controls ( Figure 9) allow you to select between the default High bandwidth output, or
Medium and Low reduced bandwidth options which, dependent on your network throughput capabilities
and other traffic, or size of the image required to display on the receiver, may work better for you.
FIGURE 10
The highest Video Bandwidth setting outputs the same video format as you have selected using the Output
DIP switches, located near the 3G-
SDI connector on the camera’s connector panel.
NOTE: The various DIP switch configurations for different output formats are depicted on a sticker on the underside
of PTZ2
’s
pedestal base. Typically, you might choose something like 1080p/59.94, or 1080p/50.
From left to right, the other Bandwidth options correspond to SD and 720P output formats.
1.5.2 PAN, TILT AND ZOOM
The Pan, Tilt controls and Zoom slider work much as you would expect. Likewise the neighboring preset
buttons are easy to use.
Simply click Store followed by a numbered Preset button to store the current PTZ2 position; click the
numbered Preset button along to send the camera to the stored position.
FIGURE 11