NewTek NDI HX-PTZ2, Operating Instructions Manual

Page: 26 / 46

Page | 22
System
Prompt
On /
Off
Turn on/off the prompt
information on the display
IR Receive
On / Off
Turn on/off the infrared
reception
Motionless Preset
On / Off
When the function is enabled,
the screen will Freeze when
Preset is executed. Freeze will be
released
after Preset is
completed.
Tally Lamp Enable / Disable Turn on/off the Tally Mode
Audio In
Line In /Mic In Set Audio In
Audio Enable On / Off Turn on/off sound output
Audio Volume
0 ~ C ~ 10 Volume Setting
Language
1. English / Chinese
Language
Initial Position
Last Mem
1
st
Preset
On bootup, return to the last
position or Preset1
Control Device
Encoder / Controller
Control Device:
Controller: acceleration on
Encoder: acceleration off
Protocol 1. Protocol V / Protocol PD
Protocol V: VISCA
Protocol PD: PELCO D
PD Address 1~ C ~255
The Protocol set to PD allows the
camera ID address to be assigned
Factory Reset On / Off
Resume the factory default
setting
FW Upgrade
On /
Off
Upgrade Firmware
Display the current setting status
Status
Displays current settings