NewTek NDI HX-PTZ2, Operating Instructions Manual

Page: 25 / 46

Page | 21
Auto Focus
AF Sensitivity
1. Low
2. Middle
3. High
Select the AF triggering speed.
The higher the speed is, the
faster AF is triggered
AF speed
Fast / Normal Focus speed after AF triggering
AF Frame
Full Frame /Center
AF frame setting, when central
area was set as AF frame,
focusing will be on the center of
the screen. When Full Frame was
set as AF frame, focusing will be
calculated based on the full
screen
PTZ Assist
1. On
2. Off
On: Focus In Manual mode, PTZ
will trigger focus. Scene changes
do not trigger focus (such as
blocking the lens with paper)
Off: Focus In Manual mode, PTZ
will not trigger focus. Scene
changes do not trigger focus, but
retain Zoom Tracking (remember
the last Zoom focus setting).
Ethernet
DHCP On / Off
Enable/Disable DHCP setting
using left and right arrow keys
and press [ENTER] to apply
setting.
IP Address 192.168.100.168
Press [ENTER] to modify the
items; select the item to be
modified using left and right
arrow keys, and modify the value
using numeric keys.
Subnet mask
255.255.255.0
Press [ENTER] to modify the
items; select the item to be
modified using left and right
arrow keys, and modify the value
using numeric keys.
Gateway
0.0.0.0
Press [ENTER] to modify the
items; select the item to be
modified using left and right
arrow keys, and modify the value
using numeric keys.
Audio Audio In
1. Line In
2. Mic In
Audio Enable
1. Line In
2. On
Audio Volume 0 - 10 Defaults to 5
Audio Delay
1. Off
2.
On
Audio Delay Time -1ms
to -500ms