25
3. There are four options for steering sensitivity. Attaching the cable
to the outer holes will mean direction changes happen more
gradually,while attaching it to the inner holes will make direction
changes more sudden. It is recommended that you start by
hooking the stainless steel biner to the outermost holes.
4.3.5.2
Cable to Perform Reverse Lock
The reverse lock secures the motor when it is being used in reverse. It
needs to be activated when motor is used in reverse to keep the motor
from rotating up and out of water.
1. Tie the cable securely to one side of the S biner.
2. Attach the S biner to the reverse lock cord as shown.
3. Thread the cord through the cable guide on the bracket as shown.
4. Install the handle at the other end of the cable.
Cable guide
Cord to perform
the reverse lock
