21
4.3.2
Setup With Control Cords at the Bottom
If the kayak control cords come out under the position of the
supporting drum, follow the steps below to finish the motor control
cords setup:
1.
Assemble the swing arm and clamping ring as the figure shows,
then insert the screw, washer, and nut, as shown. Connect them
loosely but don’t tighten yet.
2. Place the screw, washer and nut on the steering triangle as the
figure shows and connect them loosely, but don’t tighten yet.
M6 screw
Washer
M6 nut
Steering triangle
M6 screw
Washer
M6 nut
Clamping ring
Swing arm
