© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
83
ELECTRONICS
Source(s): G4 D10 + A7 + SDHD CAM General Information & Setup Guide (Version
210427.01)
Product(s): Xite XSG4NA 9” Touch Screen Infotainment Navigation System (Model:
XS90116CKT51, Newmar Part Number: 155704)
Cameras and Video Monitoring Systems
Rear View Cameras
Installed as a standard feature, the rear view monitor
system assists the driver in the backing and parking of the
vehicle. This system consists of a camera mounted on the
rear cap and a monitor located on the dash.
Camera and Video Monitoring System Overview
Side View Cameras
As an option for the rear vision system, your unit may be
equipped with “side view” cameras. These cameras are
tied into the rear vision system and are activated by the
turn signals. When a turn signal is activated, the monitor
will switch to display that side of the unit. Once the turn
signal cycle is complete, the display will revert back to the
previous camera for the Voyager system and Xite system.
In some Xite systems, the camera selection may default
back to the rear camera.
Camera Selection
If the rear vision monitor is turned on manually, you can
toggle through the cameras by using the “Source” button
on the Voyager system, or the “Menu” button followed
by the “Camera Select” icon on the Xite system, allowing
you to stay on any given camera that you choose unless
a reverse or turn signal is detected. Select Xite systems
may have a “CAM” button that serves as a shortcut to the
camera settings. Xite systems with a “360 Camera Select”
switch allows the user to toggle through and select
multiple camera views.
This article provides an overview of the camera and video monitoring system.
The video system features cameras mounted on the exterior of your coach and is connected to the in-dash video screen.
This system comes on automatically when you put the transmission in reverse to allow you to see behind your unit when
backing up. Additionally, it can be manually turned on in transit to allow you to monitor your towed vehicle or for additional
assistance in passing maneuvers.
OmniVue 360 Surround View Camera System
Operation (Model: PV360NS)
This article provides basic operation instructions for an OmniVue 360 Degree Surround View Camera System (Model:
PV360NS).
Overview
The OmniVue 360 is virtually the same as the prior PV360
system. The difference is in the added views available. The
installation is exactly the same with the same footprint. This
document will show what you should see for each view.
The system does require being calibrated. If the system
is not calibrated you will see a block in the middle of the
screen that says “WARNING”. Another sign that it has not
been calibrated is there will not be a Newmar logo at the
bottom right of the monitor. If not calibrated, it will show
”PERIMETERVIEW 360” instead.
To access the 360 camera views, touch the “CAM” button
on the left side of the monitor. Below are the camera views:
CONTACT RIVERPARK INC.
•
Website: www.riverparkinc.com
•
Email: [email protected]
•
Toll Free: (800) 442-7717
Summary of Contents for Kountry Star 2022
Page 1: ...SM 2022...
