© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
128
EXTERIOR
How to Operate a Super C Driver and Passenger
Power Window
This article provides the instructions for operating the driver and passenger power window on a Freightliner M2
“Super C” coach.
This article provides an operational overview of a vented crank-style window.
How to Operate a Vented Crank-Style Window
Opening and Closing The Vent
To open a vented crank-style window, rotate the window
knob clockwise until the window reaches the fully-
extended position. The operator arms near the bottom will
be nearly straight when the window is fully extended.
To close a vented crank-style window, rotate the window
knob counterclockwise until the window is closed and the
knob can no longer be turned. The operator arms near
the bottom should also be snug.
Removing The Screen
To clean the inside of the window
and the screen, the screen must
be removed.
1. Remove the crank knob using
a Philips screwdriver in a
counterclockwise motion.
2. Carefully pull on the screen
frame until the clips pop out
from the window opening.
3. Clean the screen and inside
of the window.
4. Carefully pop the screen
back into the window frame.
5. Reinstall the crank knob
using a Philips screwdriver.
Hold the crank knob while
tightening the screw in a
clockwise motion.
Power windows are optional, and can be installed on
one side or both sides. One power window switch
(window icon) will be installed on the dash for each
window. If your vehicle is equipped with power
windows, press up to raise the window; press down
to lower the window. Releasing the switch causes the
window to stop.
Cleaning The Glass
Apply straight mineral spirits to a clean, soft cloth and
wipe the glass. Dry with a clean cloth Next, clean the
glass again, using a clean cloth with a 50-50 mix of
water and a household window cleaner like Windex ™
or GlassPlus™. If there is still a residue, remove it with
rubbing alcohol and dry.
Source: Hehr Service Manual
Removing The Screen
Open the window and screen. Press upward on the
screen frame top, pushing the frame deeper into its
pocket. This will compress the springs and allow the
screen frame bottom to rotate out of the bottom track. Be
careful with the plastic screen springs, so that they can
be re-used.
How To Clean The Windows
This article provides information about windows used by Newmar, which are equipped with sliding screens that can be
removed for cleaning.
Source(s): Freightliner Business Class M2 Driver’s Manual (STI-455-6)
Summary of Contents for Kountry Star 2022
Page 1: ...SM 2022...
