23
Stainless Steel Handle removeable, (Plug in and out)
(see figure 3.5A)
The optional stainless-steel handle is designed to be of plug in and plug out type, this will enable the
handle to be removed when not operating the door to avoid excessive heat transfer into the handle
when the stove is in operation and hot.
Parts: 1. Screw. 2. Washer. 3. Spacer. 4. Stainless steel handle. 5. Plug in adaptor 6. Elbow. Position
the screw, washer, and spacer through the stainless-steel handle and tighten screw securely into the
plug-in adaptor. The handle can now be plugged into the elbow when operating the door and then
removed when handle operation is not required. It is recommended the stainless-steel handle to be
placed into position away from the stove and any heat when unplugged onto a non-combustible
surface, protect any surfaces that the handle is to be placed with a non-combustible and non-heat
transfer material. To operate the handle, move in direction as shown in figure 4 to either open or
close the door.
Figure 3.5A
