24
Stainless Steel Handle fixed
(see figure 3.5B)
(
Optional configuration when stove is not in use and cold
)
For aesthetic purposes the stainless-steel handle can be fixed into position when the stove is not in
use and cold.
For this configuration unscrew the plug-in type handle and remove the spacer (part 3) and the plug-
in adaptor (part 5).Pass the screw and washer (part 1 & 2) through the handle (part 4) and securely
tighten the screw into the threaded elbow (part 6).
Note:
Due to the heat transfer from the stove to the handle this will subsequently make the handle
extremely hot, therefore it is recommended that this handle is only used for aesthetic purposes
when the stove is not a-light and not being used such as the summer period and changed for handle
assembly option 3.5 or 3.5A when the stove is required to be used.
Figure 3.5B