nlscan.com
Page 22
The Usage of PT 800
The Setting of System
At the page for
“
Config dial-up connections
”
, you can press the keys of up and down to choose com-
bination, and then tick the indicators at the bottom of screen to select the function you want. We offer
four different kinds of function we could at present:
“
Dial up
”
: to dial up with the current method.
*After success of dial-up, the PT800 will get an address of IP, which will be shown at the end of mes-
sage came from it. From then on, we can dial up to make use of the applied programs.
“
EDIT
”
: this operation offers you a permission to revise your connecting attribute, and fit the
requirement of modem. An attribute connection usually includes: the number of modem port, the baud
rate of modem for its negotiation, user name and its password, etc., which are needed to be offered
when a dial-up is required. It is a certain different attribute with the usage of different kinds of modem,
such as APN (Access Point Name) is the special configure for GPRS modem while telephone number
is the special configure for its own modem.
“
Set to default
”
: set the current combination as the acquiescence connection, and mark a star * in
front of the connecting method.
“
Copy
”
: set a duplicate for the setting of connection chosen. After this operation the system will
bring out a new page, and ask you to give a name for the new duplicate, as well as to compile a new
name for its attribute. After that, there will appear one more connecting item in the page of information
compilation, such as showed in the picture bellow. The newly added input connection of GPRS is the
name you just gave to the duplicate added.
gpd.sunwayinfo.com.cn