nlscan.com
Page 34
Appendix
Programming Codes of PT850
Load all parameters factory defaults
Enable/Disable Programming Codes
Enable
Disable
Laser
’
s Duration of Time
If need to set the laser
’
s duration of time as 3 seconds, follow the steps below:
1. Read the programming code below.
2. Read digit
“
3
”
and
“
0
”
Set Prefix and Suffix
1. Read the barcode you want to program.
2. Refer to the
“
Table 1
”
to get the ASCII value.( A: 1065)
3. Read the 4 digits you get.
Prefix
Suffix1
Suffix2
Data Format Cancel
Set Data Format
Data as is
<Data> <Suffix1>
<Data> <Suffix2>
gpd.sunwayinfo.com.cn
