nlscan.com
Page 14
The Usage of PT 800
Turn ON / OFF, Idle and Charge
Turn ON
»
Touch the turn-on key of PT800, it will enter the system of operation in about 3-5 seconds.
Idle
»
After turn on, gently touch the key of turn-on; PT800 will enter into the state of idle immediately
(in the instance the function of Idle is turned ON).
Timing in the system is also able to be set for the state of Idle automatically.
Press any key to withdraw from the state of Idle.
Turn OFF
»
Press the power key of PT800 without a stop,
System hints:
“
POWER DOWN....
”
, which means the data is storing,
System hints: the storage of data is done! Please remove the continuous press on the power key.
”
It means the storage of data has already done, and the press to the key of power can be stopped, then
the system of
PT800 turn off the power automatically.
*In the state of down, press power key of PT800 for 10 seconds, the system will be turned off
automatically.
Charge
»
Able for PT800 to connect external power communication cable to 5.6V power with the adapter
to operate charge.
Also able to make use of multi-function base to charge.
A time needed to charge is 3 hours. When the indicator red light goes out, it means the task of
charge is done.
*Notice: It is perfect to use the adapter along with the device of PT800, please do not make use of
any other adapter unless certificated to do charge by the manufacturer.
gpd.sunwayinfo.com.cn