【
Enter Setup
】
55
**
【
Exit Setup
】
Set Length Range for Code 128
The scanner can be configured to only decode Code 128 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
【
Set the Minimum Length (Default: 1)
】
【
Set the Maximum Length (Default: 127)
】
Maximum length of a 1D barcode should not exceed 127 bytes. If minimum length is
set to be greater than maximum length, the scanner only decodes Code 128 barcodes
with either the minimum or maximum length. If minimum length is same as maximum
length, only Code 128 barcodes with that length are to be decoded.
Set the scanner to decode Code 128 barcodes containing between 8 and 12
characters:
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode.
3.
Scan the numeric barcode “8”. (See the
Appendix
)
4. Scan the
Save
barcode. (See the
Appendix
)
5. Scan the
Set the Maximum Length
barcode.
6.
Scan the numeric barcode “1”.
7.
Scan the numeric barcode “2”.
8. Scan the
Save
barcode.
9. Scan the
Exit Setup
barcode.
Summary of Contents for HR3260-CS
