Newland BS-80 User Manual Download

Page: 3 / 172

Revision History

Version

Description

Date

V1.0

Initial release.

March 18, 2015

V1.1

Added the content concerning the 2D version.

May 19, 2015

V1.2

Updates:

1. Added the Enable/Disable USB HID-KBW feature in Chapter 2.

2. Added barcode parameters in Chapter 3.

September 16, 2015

V1.3

Added the USB country keyboard types in Chapter 2.

Note:

Firmware version V1.00.006 or higher is required for the new feature above.

October 13, 2015

V1.4

Updates:

1. Added

Chapter 4 Prefix & Suffix

2. Added the

“

Code ID Table (1D Scanner)

” and “

Code ID Table (2D

Scanner)

” in Appendix.

Note:

Firmware version V1.00.011 or higher is required for the new feature above.

January 21, 2016

V1.4.1

Updated the programming barcodes in the

“

Digit Barcodes (1D

Scanner)

” and “

Save/Cancel Barcodes (1D Scanner)

” in Appendix.

May 5, 2016

Summary of Contents for BS-80













































































































































































Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands

Newland BS-80, User Manual

Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands