Newland BS-80 User Manual Download

Page: 111 / 172

Add-On Code

An EAN-13 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the

examples below, the part surrounded by blue dotted line is an EAN-13 barcode while the part circled by

red dotted line is add-on code.

Enable 2-Digit Add-On Code

Disable 2-Digit Add-On Code

(default)

Enable 5-Digit Add-On Code

Disable 5-Digit Add-On Code

(default)

Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code:

The scanner decodes a mix of EAN-13

barcodes with and without 2-digit/5-digit add-on codes.

Disable 2-Digit Add-On Code/ Disable 5-Digit Add-On Code:

The scanner decodes EAN-13 and

ignores the add-on code when presented with an EAN-13 plus add-on barcode. It can also decode

EAN-13 barcodes without add-on codes.

Summary of Contents for BS-80













































































































































































Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands

Newland BS-80, User Manual

Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands