Newland BS-80 Page 14 User Manual Download

Page: 14 / 172

Chapter 1 Getting Started

Introduction

The BS80 is a wireless pocket barcode scanner equipped with 1D or 2D scan engine to meet different

needs. It is a great space-saver for busy or limited workspaces. It also supports iOS, Android, and

Windows devices through Bluetooth HID or SPP communication.

An illustrated introduction to the BS80 is included in this chapter. If you have the scanner at hand, make

good use of it to develop a better understanding of this manual. This chapter is written for normal users,

maintenance staff and software developers.

Unpacking

Open the package and take out the scanner and its accessories. Check to make sure everything on the

packing list is present and intact. If any contents are damaged or missing, please keep the original

package and contact your dealer immediately for after-sale service.

Summary of Contents for BS-80













































































































































































Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands

Newland BS-80, User Manual

Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands