Newland BS-80 User Manual Download

Page: 64 / 172

Transmit Preamble Character

Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E

barcode. Select one of the following options for transmitting UPC-E preamble to the host device: transmit

system character only, transmit system character and country

code (“0” for USA), or transmit no

preamble.

No Preamble

(default)

System Character

System Character & Country Code

UPC-E Extension



Disable UPC-E Extend:

Transmit UPC-E barcodes as is.



Enable UPC-E Extend:

Extend UPC-E barcodes to make them compatible in length to UPC-A.



Convert UPC-E to UPC-A:

Extend UPC-E barcodes to make them compatible in format to UPC-A.

Disable UPC-E Extend

(default)

Enable UPC-E Extend

Convert UPC-E to UPC-A

Summary of Contents for BS-80













































































































































































Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands

Newland BS-80, User Manual

Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands