Newave 1000-3000VA, User Manual

Page: 32 / 52

8.1.1 USB Port Descriptions
The USB communication protocol definition as below:
1. Comply with USB version 1.0, 1.5Mbps
2. Comply with USB HID Version 1.0.
3. The Pin Assignments of the USB port:
8.2 The Pin assignments of the EPO Input port are:
To enable the EPO function, please short Pin 1 & 2.
9 Optional Communication Cards
The UPS rear panel is equipped with a ready “plug-and-play” optional
communication card slot to accommodate either a AS400 Dry Contact card or
SNMP/Web card. These optional communication cards respective functions are
described in 9.1 & 7.3
9.1 AS400 (Dry Contact) card
The signal descriptions of the 10 assigned pins of the Dry contact card are indicated below. Take
note that all pins except Pin-9 & Pin-10 which are isolated, are shorted or open circuited (selectable
using Jumper cable) to the common Pin-8