ChipSHOUTER Users Manual
: Packing Information
12
1.
The ChipSHOUTER CW520 main unit is the EMFI fault in-
jection platform itself.
2.
The 19V power supply provides DC power to the Chip-
SHOUTER.
3.
The injection probe tips must be added onto the end of
the ChipSHOUTER before using the device. Do not touch
the probes during operation.
4.
The Isolated USB adapter provides a computer interface
to the ChipSHOUTER.
5.
The SMA Saver is a sacrificial SMA male to female
adapter. It is added onto the ChipSHOUTER to save wear
and tear on the ChipSHOUTER SMA connector. The SMA
Saver can easily be replaced in case it is damaged.
6.
The SMA right angle adapter is used in combination
with a horizontal mount XY table.
7.
The oscilloscope probe adapter allows monitoring of
the pulse inserted at the tip of the ChipSHOUTER it-
self.
8.
The SMB to SMA adapter allows interfacing the external
trigger input with the ChipWhisperer trigger outputs,
or other equipment with logic-level SMA outputs.
9.
The SMB to BNC adapter allows interfacing the external
trigger input with regular lab equipment.
10.
The SMB cable is used to connect the external trigger.
11.
The Ballistic Gel SRAM target provides detailed infor-
mation about the effectiveness of a fault injection
pattern.
12.
The Simple EMFI target allows quick validation that a
fault injection probe is working.
