New Rock Technologies NRP1004 Series User Manual Download Page 83

Page: 83 / 93

NRP1004 Series IP Phone User Manual

New Rock Technologies, Inc. 5-53

Name Description

Type

Specifies the update type. The value can be:
1.

Application update

: downloads the system update file.

Config file export

: uploads the configuration file to the FTP/TFTP server, name and

save it.
3.

Config fie import

: downloads the configuration file to the phone from the

FTP/TFTP server. The configuration will take effect after the phone is restarted.
4.

Phone book export

(*.vcf)

Protocol

Specifies the protocol running on the server. The value can be FTP or TFTP.

Update Logo File

Select File

Specifies the URL address of the logo file to be updated.

Delete Logo File

Select File

Specifies the logo file to be deleted.

Logo File

Logo File

Specifies a logo file.

5.8.5 Access

In this page, you can add or delete a user as needed, change the user level, and configure the keyboard

lock function.

Figure 5-33 Access setting interface

Summary of Contents for NRP1004 Series






























































































Search results

Summary of Contents for NRP1004 Series

Reviews:

Related manuals for NRP1004 Series

Brands by name

Popular brands

New Rock Technologies NRP1004 Series, User Manual

Search results

Summary of Contents for NRP1004 Series

Reviews:

Related manuals for NRP1004 Series

Brands by name

Popular brands