NRP1004 Series IP Phone User Manual
New Rock Technologies, Inc. 3-9
3.3.4 Dial Peer
Press
Menu > Features > Enter > Dial Peer > Enter
.
Press
Add
and input the number and destination in the page displayed. For example: the number is
1 and the destination is 1234. Then, press
Save
.
Input
1#
in the dial interface, you call the number 1234 in speed dial mode.
3.3.5 Auto Redial
Press
Menu > Features > Enter > Auto Redial > Enter
.
Enable the auto redial function using the navigation keys
and
. If you choose
Enabled
,
set values for
Interval
and
Times
, and then press
Save
.
After auto redial is enabled, if the callee does not answer your call for the moment, you are
prompted whether use the auto redial function. If you press
OK
, the phone will call out the callee
according the Interval and Times you set.
3.3.6 Call Complete
Press
Menu > Features > Enter > Call Complete > Enter
.
Enable this function using the navigation keys
and
.
If the callee does not answer your call for the moment, the phone prompts you “
Call Complete
Waiting number
?” Press
OK
. When in the callee becomes idle, the phone prompts you
“Call
Complete Waiting number
?” (in 30s). If you press
OK
, the phone will call out the number
automatically.
3.3.7 Headset Ringing
Press
Menu > Features > Enter > Headset Ringing > Enter
.
Enable this function using the navigation keys
and
and insert a headset. After that, the
headset rings when the phone has an incoming call.
3.3.8 Power Light
Press
Menu > Features > Enter > Power Light > Enter
.
Switch on or off the power light using the navigation keys
and
.
3.3.9 Hide DTMF
Press
Menu > Features > Enter > Hide DTMF > Enter
.
You can choose any of the following options using the navigation keys:
Disabled
,
All
,
Delay
,
Last Show
. If you input
DTMF
while in conversing, the DTMF will be displayed as you have set.
