NRP1004 Series IP Phone User Manual
New Rock Technologies, Inc. 3-5
3.2.4 Click to Dial
When browsing in an appointed Web page, user A can click to call user B via a link (this link to user B),
then user A’s phone will ring, after A hooks off, the phone will dial to B.
Note: External software supporting the click to dial function is required.
3.2.5 Call Back
The function allows you to call back the last number that called you.
3.2.6 Auto Answer
If an incoming call is not answered until the answer time expires, the phone enabled with this function
will answer the call automatically.
3.2.7 Hotline
You can set a hotline number for each SIP line in the dialer interface. After Warm Line Time, the
phone will call out the hotline number automatically.
3.2.8 Application
SMS
Press
Menu > Applications > Enter > SMS > Enter
.
Use the navigation keys to select and read messages in the Inbox/Outbox.
After checking a message, you can press
Reply
to reply it. Use the 2aB softkey to select an input
method. Then, compose a reply message, press
OK
, select a line for message sending, and press
Send
.
To compose a new message, press
New
and select an input method using the 2aB softkey.
Compose the message, press
OK
, select a line for message sending, and press
Send
.
To delete a message, press
Delete
. There are three options for you to choose: Yes, All, and No.
Choose any of them as needed.
Memo
Memos remind you of important things.
Press
Menu > Application > Memo > Enter > Add
.
There are some options to configure:
Mode
,
Date
,
Time
,
Text
, and
Ring Tone
. After the configuration,
press
Save
.
Voice Mail
Press
Menu > Application > Voice Mail > Enter
.
Select the SIP line to be configured with a voice mail through the navigation key
or
,
and press
Edit
. Then, use the navigation key
or
to enable voice mail, and input the