NRP1004 Series IP Phone User Manual
New Rock Technologies, Inc. 5-35
Figure 5-21 Dial plan setting interface
Table 5-20 Dial plan parameters setting
Name Description
Basic Setting
Press "#" to Send
Indicates that you need to press # after dialing a number.
Dial Fixed Length
Indicates that the phone will automatically call out after the number with a specified
length is dialed. For example, if the value is set to 11,
Press # to Do
Blind Transfer
Enables the phone to transfer the incoming call to a specified number (the third party)
after
#
is pressed. This function requires you to press
#
after inputting the phone
number of the third party.
Blind Transfer on
OnHook
Enables the phone to transfer the incoming call to a specific number (the third party)
after hang-up. This function requires you to input the number of the third-party before
hang-up.
Attend Transfer
on OnHook
Enables the phone to transfer the incoming call to a third party after the call is
answered.