New Rock Technologies HX4E Series User Manual Download Page 74

Page: 74 / 125

User Manual MX Series Voice Gateway

74 New Rock Technologies, Inc.

2.6.6 SIP Configuration

SIP messages consist of request messages and response messages. Both include a SIP message-header

field and SIP message-body field. The SIP message header mainly describes the message sender and

receiver; SIP message body mainly describes the specific implementation method of the dialog.

Message of request: the SIP message sent by a client to the server, for the purpose of activating the given
operation, including INVITE, ACK, BYE, CANCEL, OPTION and UPDATE etc.

Message of response: the SIP message sent by a server to the client as response to the request, including
1xx, 2xx, 3xx, 4xx, 5xx, and 6xx responses.

Message header: Call-ID.

Parameter line: Via, From, To, Contact, Csq, Content-length, Max-forward, Content-type, White Space,
and SDP etc.

MX gateways provide flexibility in field setting in order to improve compatibility with the SIP register
server.

After login, click

Advanced

SIP

to open this interface.

Figure 2-32

SIP Related Configuration Interface

Summary of Contents for HX4E Series






























































































































Search results

Summary of Contents for HX4E Series

Reviews:

Related manuals for HX4E Series

Brands by name

Popular brands

New Rock Technologies HX4E Series, User Manual

Search results

Summary of Contents for HX4E Series

Reviews:

Related manuals for HX4E Series

Brands by name

Popular brands