User Manual MX Series Voice Gateway
104 New Rock Technologies, Inc.
After the upgrade is successful, the device automatically restarts. Access the gateway
management system interface again, click
Info
to view and check whether the software version
is the upgrade target version.
2.10.3 Restore Factory Settings
After login, click
Tools
>
Restore factory settings
.
The factory settings are designed based on common applications, and therefore, there is no need to
modify them in many deployment situations.
For HX4E/MX8A/HX4G/MX8G, you can choose to restore network or telephony related factory settings,
or both. For MX60/MX60E/MX120G, only restoring both is available. Restoration takes effect after the
system is restarted.
Figure 2-63
Restore Factory Settings Interface (HX4E/MX8A/HX4G/MX8G)
Figure 2-64
Restore Factory Settings Interface (MX60/MX60E/MX120G)
2.10.4 Capture Recordings on the Port
After login, click
Tools
>
Analog capture
to open this interface. This tool can be used to capture the
voice stream from the Phone or Line interface. When the call lasts longer than 200 seconds, only the first
200 seconds of voice stream will be captured. The voice file is stored on the gateway in PCMU format.
Figure 2-65
Interface for Capturing Port Recordings
